TOSHIBA HGST DT01ABA200 DT01ABA200V DT01ACA300 HDD PCB ,PCB Number:220 0A90380 01 The Hard Disk Drive is not include.
Symptoms of failure:
The drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer
The drive will power up normally and be recognized correctly but will report a size of 0 bytes
The drive will power up but report SMART errors on boot
Replacement the PCB may not solve the above problem. These problem is caused by the HDD firmware corrupted.
1.These boards are used, the circuit board components not falling, the interface did not break.
2. All PCB have been tested before shipping. If the PCB is faulty during shipping, please inform us immediately after your received it.
3. If you are not sure the PCB is compatible with your HDD or not. Please contact us
Replacement the PCB only can solve the problem that is caused by the PCB faulty and HDD failures are not always caused by the PCB faulty. This PCB is not guaranteed to fix your HDD.
package: 1 pcs
Tags: TOSHIBA HGST DT01ABA200 DT01ABA200V DT01ACA300 HDD PCB Board number: 220 0A90380 01 Main Controller IC: LSI 6045 Stickers ：9F10781 toshiba, hgst, dt01aba200, dt01aba200v, dt01aca300, hdd, pcb, board, 0a90380, main, controller, ic:, lsi, stickers, ：9f10781, hitich, ibm